Camera - How do I turn off the clicking shutter sound?

There is not an option or setting on the BB to turn off the shutter sounds you hear when you take a picture.

However there are three workarounds to silence the shutter sounds:
Dial a phone number and, while in the call, your camera will not emit shutter sounds.
Plug in wired headphones before taking photographs.
If you have a GSM device, you can use the BerryAnnoying which will disable shutter sounds while the application is running.

Methods of Receiving Email on BlackBerry

BIS email address.

This is the free push email address included with all BlackBerry plans. Most common method for consumers/prosumers. Send the email to the free YOURNAME@carrier.blackberry.net email address. This is true push email, as email will show up instantly on the BlackBerry (in just 5 seconds in many cases) the moment someone sends it from a desktop computer. No need to check email, it shows up immediately on your BlackBerry screen, SMS-style or pager-style! To access to your @blackberry.net email account, See BWC/BIS Login Instructions

Tip For Advanced Users: When adding new POP/IMAP accounts to your BWC/BIS account, try entering dummy information for username/password. This will get you straight to the Advanced Server Page, which allows more configuration such as for Secure Password Authentication, etc.
POP and IMAP email.

This is available with all BWC accounts above. The BWC webmail site has a configuration that allows you to enter POP hostnames, usernames and passwords for a certain number of POP accounts. Your BWC will automatically check email every 15 minutes and forward a copy of messages to your BlackBerry. This is not true push email; you must send email directly to the @blackberry.net address (or use BES). Information from RIM website
Email forwarding.

Configure your existing email addresses to automatically forward a copy to your BWC email address (the one ending in blackberry.net). This will allow you to have a different email address while retaining push email capability, for those cases you do not need a BES.

Third party email software such as Reqwireless EmailViewer or HotViewer or midlet-based email client These software are not as good as the built-in BlackBerry push email but you can get third party email software and install them on the BlackBerry for those special exceptions that you don't want to integrate directly into the BlackBerry. Note: In order to be able to run third party email clients on the BlackBerry, you need either (a) BlackBerryOS 4.0 or later, or Nextel/Telus BlackBerryOS 3.7 or later ..... or (b) use a Blackberry Exchange Server, or a BES/MDS hosting service.
BlackBerry Redirector.

This is a special software program included on a CD included with BlackBerries, that you can install on your computer. You can run it on a home computer or office computer -- just leave the computer on 24 hours a day. The software will watch for new emails arriving in Microsoft Outlook and then automatically forward a copy of these emails to your BlackBerry. (No BES needed, although some users have reported a BES Server Address Required during installation). But you must keep your computer running 24 hours a day to get copies of your email.
BlackBerry Mail Connector.

This is different than the Redirector. This is a special software program included on a CD included with BlackBerries, that you can install on your computer. You can run it on a home computer or office computer -- just leave the computer on 24 hours a day. The software will watch for new emails arriving in Microsoft Outlook or Lotus Notes and then automatically forward a copy of these emails to your BlackBerry. (No BES needed). But you must keep your computer running 24 hours a day to get copies of your email. This method allows relatively tight integration including mail read status, deletes and SENT mail (mail sent on the Blackberry will show up in your SENT Box.
Blackberry Enterprise Server (BES)

This can be purchased as a server for full internal integration with corporate email, (expensive) or as a BES (MDS) Hosting service for more individual integration (cheaper). Mainly used by corporations, although some prosumers have purchased BES/MDS Hosting services. This is the preferred corporate method of push email, fastest and most secure, and allows you to have your own custom domain names. It interfaces with Exchange Server (or Lotus Domino, or Groupwise) and allows your BlackBerry to automatically mirror your Exchange Inbox. Wireless email sync capabilities means that if you delete email on your BlackBerry, it also gets deleted from the desktop. There are other benefits to BES. For example, Version 4.0 of BES also adds wireless over-the--air Addressbook/Calendar/Notes/Tasks synchronization. More information for the
full corporate version is found here Alternatively, you can get BES Hosting Service if you don't want to purchase the full server. This service is offered by several third parties. The full server itself can cost over a thousand dollars, while getting hosting service for one BlackBerry typically costs less than $25 per month. All five of the above can be used simultaneously on different email addresses, into the same BlackBerry "Inbox" (Messages screen).

Using BlackBerry As Modem

Introduction
Did you know that BlackBerry can now be used just like an external modem for a laptop computer, so that a laptop can have full Internet access? This is useful when you need to do certain things that a BlackBerry cannot yet do. Increasing numbers of success reports have caused me to post this message. (Note: Mark Rejhon has not himself yet successfully used a BlackBerry as a modem; I am aggregating information). Sometimes, it is still tricky to set up a BlackBerry as a modem for a laptop, but this feature is becoming more and more common in cellphones, and BlackBerry models are following suit.
.
Credits
Credit goes to (BBForums Usernames) Mark Rejhon, Scoobydoo, bfrye, bollar, VitaminB, jmounts, webtoker, dozment for their contributions. Thanks for user Wobly specifically for the Vista instructions.
.
Supported BlackBerry Models
Model 710X: Success (Rogers, T-Mobile)
Model 7290: Success (Rogers, AT&T, Cingular, T-Mobile)
Model 7250: Success (Verizon)
Model 8100 Pearl: Success (T-Mobile)
Model 8300 Curve: Success (T-Mobile)
Model 8320 Curve (via BlueTooth): Success (T-Mobile)
Model 8310 Curve (via BlueTooth): Success (AT&T)
Model 8800: Success (T-Mobile)
Model 8700: Success (T-Mobile, Rogers, Cingular, Verizon)
Model 7130e: Success (Verizon, Bell Mobility)
Model 7510/7520/7230/7280/7730/7780/7100i: Use http://www.mobishark.com/
All Older Models: Use http://www.mobishark.com/
.
IMPORTANT:
Other Models Than Listed Above: There is no modem built in. However, you can use third-party modem software called Shark Modem at http://www.mobishark.com/
.
Supported Carriers
Carrier AT&T: Success!
Carrier Rogers: Success!
Carrier Vodafone: Success!
Carrier T-Mobile: Success!
Carrier SwissCom: Success!
Carrier Verizon: Sometimes Successful
Carrier Cingular: Sometimes Successful
Carrier Nextel/Telus: May need to use http://www.mobishark.com/
Carrier Sprint: May need to use http://www.mobishark.com/
Carrier Bell Mobility: 7130e Confirmed, Must use http://www.mobishark.com/ otherwise
Currently, Rogers, AT&T, T-Mobile, and Vodafone UK are reported to work. Sometimes and Cingular works, but is much harder to setup. No confirmations for other carriers yet.
Important: If you are using a BES 4.0 server, your BES 4.0 server, you should not use the "Disable IPmodem" setting. BES hosting providers such as eOutlook/Mailstreet/BES4U/MyBlueberry must avoid setting the "Disable IPmodem" setting.
.
Connect Your BlackBerry
Make sure your BlackBerry is connected by USB cable, and your BlackBerry Handheld Manager is running (just launch BlackBerry Desktop to run it.) This is necessary for using the BlackBerry as an external modem. You cannot use BlackBerry as a modem unless you have BlackBerry Handheld Manager running in the background! Note: For a Bluetooth modem connection on new Curve devices the BlackBerry Manager does not have to run in the background for the connection to work. You need to simply pair your laptop and the Curve.
.
Modem Driver Install
If you installed a recent version of BlackBerry Desktop that came with a 7100t, 7290, 7250, or 7520, it should include modem drivers and already be automatically installed. In the event you need to manually install them, the modem drivers should be located in this directory:
C:\program files\Common Files\Research In Motion\Modem Drivers
However, if you are having problems with these drivers, uninstall, delete all leftover RIM files, and then reinstall the latest version of BlackBerry Desktop.
.
Verify The Modem Driver Is Functioning
Go to Control Panel -> Phone & Modem Options. In the Modems tab, you should see a new Standard Modem on a new port (such as COM6 or COM11). Click Properties -> Diagnostics -> Query Modem. You should see the following:Quote:
ATQ0V1E0 - OK
AT+GMM - BlackBerry IPmodem
AT+FCLASS=? COMMAND NOT SUPPORTED
AT#CLS=? COMMAND NOT SUPPORTED
AT+GCI? COMMAND NOT SUPPORTED
AT+GCI=? COMMAND NOT SUPPORTED
ATI1 - Research In Motion / BlackBerry IPmodem
ATI2 - Research In Motion / BlackBerry IPmodem
ATI3 - Research In Motion / BlackBerry IPmodem
ATI4 - Research In Motion / BlackBerry IPmodem
ATI5 - Research In Motion / BlackBerry IPmodem
ATI6 - Research In Motion / BlackBerry IPmodem
ATI7 - Research In Motion / BlackBerry IPmodem
Note: This may look different on Nextel 7520, or Sprint/Verizon/Bell Mobility 7250. This is normal. Just make sure there is a response at all, rather than no response.



.
IMPORTANT SPECIAL CONFIGURATION STEP
Click Properties -> Advanced. Add only ONE of the following Extra initialization commands with the appropriate carrier-specific APN Setting:
For Vista users only: Under Control Panel>Phone and Modem>Properties on the General Tab, click "Change Settings". After giving Administrator approval, click the Advanced tab. There, enter the appropriate APN settings for your carrier as noted below.

TMOBILE USA Users (Success!)
+cgdcont=1,"IP","wap.voicestream.com"
This is a newer string from TMO that works: +cgdcont=1,,"wap.voicestream.com"
Another alternate string (required for BlackBerry 8100 Pearl & BlackBerry 8800): +cgdcont=1,"IP","wap.voicestream.com"

Rogers Users (Success!)
+cgdcont=1,"IP","internet.com"

Cingular Blue/AT&T Users (Success!)
+cgdcont=1,"IP","proxy"

Cingular Orange Users (Success!)
+cgdcont=1,"IP","ISP.CINGULAR"

at&t Users (Success!)
AT+cgdcont=1,"IP","WAP.CINGULAR"

UK Vodafone Users (Success!)
+cgdcont=1,"IP","internet"

SwissCom Users (Success!)
+cgdcont=1,"IP","gprs.swisscom.ch"

Verizon Users (Success!) - Keep blank
Nextel/Telus iDEN Users (untested) - Keep blank
Sprint/Bell Mobility CDMA Users (untested) - Keep blank
.
Add A New Internet Connection
Close the Phone and Modem Options and the Control Panel.
For XP: Create a new connection with Start -> Connect To -> Show all connections -> Create a new connection.
1. Click Next

2. Select "Connect To The Internet" then Next

3. Select "Set up my connection manually" then Next

4. Select "Connect using a dial-up modem" then Next.


For Vista: Create a new connection with Start -> Connect To ->

1. Set up a connection or network

2. Choose a connection option: Click on "Connect to the Internet (Set up a wireless, broadband, or dial-up connection to the Internet."

3. You are already connected to the Internet - Click on "Set up a new connection anyway"

4. At "How do you want to connect?" Click on "Dial-up"

5. Check only the Standard Modem (if prompted).

6. Give the connection a name such as "BlackBerry Modem", then Next.

7. On the next screen, pick one of the following phone numbers, depending on your carrier:
....If you use GSM/Cingular/AT&T/TMobile/SwissCom: Enter phone number *99#
....If you use iDEN/Nextel/Telus: Enter phone number S=2
....If you use CDMA/Verizon/Sprint/Bell Canada: Enter phone number #777

8. Click Next.

9. On the next screen, pick one of the following, depending on your carrier:

....If you use Cingular Blue, AT&T or Nextel:
.........Username: (blank)
.........Password: (blank)

....If you use Rogers Canada:
.........Username: wapuser1
.........Password: wap

....If you use Cingular Orange:
.........Username: ISPDA@CINGULARGPRS.COM
.........Password: CINGULAR1

....If you use T-Mobile:
.........Username: (Your TMobile 10-digit phone number)
.........Password: (Your existing TMobile.com Password)
.........Note: In USA, you can leave both blank

....If you use Verizon, replace 8005551212 with your phone number:
.........Username: 8005551212@vzw3g.com
.........Password: 8005551212

....If you use Sprint:
.........Username: (Your existing Sprint PCS Username)
.........Password: (Your existing Sprint PCS Password)

....If you use Bell Mobility, replace 8005551212 with your phone number:
.........Username: 8005551212@1x.bell.ca
.........Password: (Your Bell Mobility Voicemail PIN)

....If you use Swisscom:
.......The connection can be established anonymously, however some devices need data in those fields, if that's the case, use:
.........Username: gprs
.........Password: gprs

10. Clear all checkboxes ("Use...when anyone..." and "Make this the default...")

11. Click Finish
.
Disable IP Header Compression (*Vista users, see the note below)
Make sure TCP/IP Properties (Advanced) "Use IP Header Compression" checkbox is NOT checked. To verify this, do these steps:
1. Start Menu->Network Connections->"BlackBerry Modem"
2. Click Properties Button
3. Click Networking Tab
4. Select "Internet Protocol (TCP/IP)"
5. Click Properties Button
6. Click Advanced... Button
7. Disable "Use IP header compression" checkbox
8. Click all OK buttons to close all dialogs
Also make sure you clear all these checkboxes, if you see any of these checked:

Turn off "Enable Hardware Flow Control"
Turn off "Enable Modem Error Control"
Turn off "Enable Modem Compression"
For Vista users only: Under the Network and Sharing Center, click "Manage Network Connections". When the Network Connections screen is visible, you should have the Blackberry Modem connection you created. Right click the Blackberry Modem and select "Properties". Under the Properties screen on the General tab, select the "Configure" button. Ensure that ALL check boxes are unchecked. Select "OK" to exit the screen. Under the Networking tab, select the properties for the Internet Protocol Version 4 (IPV4). On the Properties screen, select the "Advanced" button. Ensure that "Use IP Header Compression" is unchecked. Select OK to exit the screen.

.
BES Configuration
Skip this step if you are not on BES. You only need to follow this step if your company gave the BlackBerry to you. If you are at a company and you are on a BES 4.0, your Administrator must enable the "BlackBerry IPModem" setting on the BES. This is a new setting in the Version 4.0 of BES.
.
Surf On The Laptop!
Connect to the Internet on the laptop by clicking the "BlackBerry Modem" icon via Start Menu->Network Connections. No username or password is needed.
Insert non-formatted text here

How do I reset my BlackBerry ?

Differences between hard, soft, and master resets

Resetting the BlackBerry device is a useful way to resolve issues and is usually the first step in troubleshooting the BlackBerry device. Knowing the differences between a hard, soft, double-soft, and master reset ensures that the correct troubleshooting method has been chosen.

Note: Backup all applications before resetting the BlackBerry device using the Backup and Restore tool on the BlackBerry Desktop Manager.
Performing a SOFT reset on the BlackBerry device

Performing a soft reset stops all applications on the BlackBerry device by pressing the ALT+RIGHT SHIFT(CAP)+DELETE keys. A soft reset re-establishes communication between the BlackBerry device and the computer.

Note: This does not apply to the BlackBerry® Pearl™ smartphone.
Performing a DOUBLE-SOFT reset on the BlackBerry device

Performing a double-soft reset stops all applications on the BlackBerry device and is nearly the equivalent of a hard reset. Timing however is critical. Perform a soft reset by pressing the ALT+RIGHT SHIFT(CAP)+DELETE keys. The screen will go blank. When the screen is no longer black, press the ALT+RIGHT SHIFT(CAP)+DELETE keys again. You should then see another blank screen followed by an hour glass.

Note: This does not apply to the BlackBerry® Pearl™ smartphone.
Performing a HARD reset on the BlackBerry device

The first step in troubleshooting a network, software or hardware error is often to perform a hard reset. With Java® based devices, this is accomplished by removing the battery, while the BlackBerry device is powered on. Hold the battery out for about 30 seconds, and replace. The BlackBerry device will reboot.

Note: A hard reset on a C++ based device is accomplished by pressing the Reset button.

Note: To perform a hard reset on a RIM models 850, 857, 950, or 957 device, insert the end of a paperclip inside the small hole on the back of the handheld.
Reasons to perform a hard reset

The following shows the possible reasons for performing a hard reset on a BlackBerry device.
Network Issues
Handheld displays an X beside the coverage indicator.
Handheld displays GSM (Global System for Mobile Communication) or lower case gprs (General Packet Radio Service) as the network status indicator.
User is unable to send or receive messages on the handheld.
Software Issues
User receives an error code on the handheld.
Applications do not appear to be functioning correctly.
Desktop Manager is stuck at “working” status when the handheld is connected.
Bluetooth is not detected.
Hardware Issues
Handheld display is hard to read. For example, the display shows lines obscuring text.
Keypad is not functioning correctly. For example, keys do not work, the trackwheel is not functioning correctly, or the handheld does not turn on.


Performing a MASTER reset

The master reset feature is not available on the BlackBerry device and is only applicable to selected manufacturer devices. A master reset removes all user-installed applications and data, including BlackBerry Connect software. For more about master resets, contact your service provider.